Shanghai Katalor Enterprises Co., Ltd
TEL : 0086-18317160019   SKYPE :SHANGHAI.KATALOR  E-mail : info@katalor.com
Further information
You need Further information or have question
0086-21-61182423
0086-21-61182424
info@katalor.com
Home > news > Views
A709Gr.50 high strength low alloy steel specification

A709Gr.50 high strength low alloy steel specification

Posted:2020-11-19 10:09:37
A709Gr.50 steel is a high-strength low alloy structural steel, available in shapes, plates and bars and quenched and tempered alloy steel for structural plates intended for use in bridges.

A709 Grade 50 steel is better used for outside situation. When rolling these steel materials A709 Grade 50, for each reduction of 0.01% below the specified carbon maximum,an increase of 0.06 manganese above the specified maximum will be permitted up till maximum of 1.35%. BBN steel engineers suggest customer choose low temperature impacting test for steel plates A709 grade 50-℃, because these A709Gr.50 steel plates normally used in this temperature.

A709Gr.50 steel mechanical properties 

Grade Yield strength, MPa Tensile  strength, MPa Elongation A% 0℃Akv,J
A709GR50 ≥345 ≥450 ≥18 ≥34
 

A709Gr.50 high strength low alloy steel specification

Rolling range:
Thickness*Width*Length 5-450mm*1500-4200mm*5000-18000mm
Surface Treatment:Shop primer painting under SA2.5 standard
Test: Low temperature impacting test, Ultrasonic examination, Normalized, Quenched and Tempered, NACE, HIC, SSCC and Third party inspections by end user.

Practical application
A709Gr.50 steel plate is widely used in engineering structures, such as construction steel structures, construction machinery, mining and mountain machinery, trucks, bridges, pressure vessels, etc., especially for construction and engineering machinery parts that require good weldability and toughness.
HOME | ABOUT US | PRODUCT | NEWS | CONTACT US | katalor
Copyright © 2014-2024 by Shanghai Katalor Enterprises Co., Ltd All rights reserved